![IMG_6046[1]](https://www.hearingaidparts.co.uk/wp-content/uploads/2016/08/IMG_60461-e1493935781291-scaled.jpg "IMG_6046[1]")
Oticon Bernafon RITE & Mini BTE Receiver wire (Agil, Acto, Ino)
For older models such as Oticon Agil Pro, Agil, Acto Pro, Acto, Ino Pro and Ino. Also Epoq RITE, Vigo, Vigo Pro, and Vigo Connect, Hit Pro and Hit with RITE speaker wires. Also compatible with Oticon products renamed by Hidden Hearing (examples are K220, K210, K140, K130, K90, K70, M200, M190, M180, M120C, M100C, M80, M60)
Tip: To remove use a pen tip to push release on the underside slot, then then pull the receiver away. Click the new one into place.
Standard receivers just have a number on the tip – Red for right, Blue for left. Medium receivers have a number followed by a yellow or orange dot (with a letter M inside). Power receivers have a dark grey or black spot.
Use Oticon Domes in white packs on these.
To change: Use a pin tool to push up firmly into the slot near the top / on the underside of the hearing aid body. This will loosen the old wire. Pull out. The new wire will click into the slot.
If you do not know what size of receiver you need
have a look near the tip of your old tubes – there should be a number usually Red on the left and Blue on the right.
OR
alternately email us (info@hearingaidparts.co.uk) having taken the measurement from the top of your ear (where spectacles would sit) straight down to the centre of the ear canal entrance in mm – please see picture below.
Replace your receiver tubes ONCE A YEAR for optimal performance
