Oticon miniFit receiver wire 2014-onwards



Oticon miniFit receiver wire (2014 – on)

For all new Oticon aids: Opn, (Inium) Alta, Alta2, Nera, Nera2 and Ria / Ria2 RITE products.
In three strengths – 60dB, 85dB and 100dB. Use miniFit Domes on these. All miniFit products are in black packaging.

To change: Use a pin tool to push up firmly into the slot near the top / on the underside of the hearing aid body. This will loosen the old wire. Pull out. The new wire will click into the slot.

Click for Advice

If you do not know what size of receiver you need:
have a look near the tip of your old tubes – there should be a number usually Red on the left and Blue on the right.
alternately Email us (info@hearingaidparts.co.uk) having taken the measurement from the top of your ear (where spectacles would sit) straight down to the centre of the ear canal entrance in mm – please see picture below.
Replace your receiver tubes ONCE A YEAR for optimal performance