GN Resound LiNX2 / Enya receiver wire (SureFit – NEWER VERSION)
In three strengths, LP MP and HP. In sizes 0-4.
Wax guards: use a Cerustop wax filter.
To change: Use a pin tool to lift the microphone cover up at it’s top edge. This will allow the receiver wire to be pulled away.
Click for Advice
If you do not know what size of receiver wire you need
have a look near the tip of your old tubes – there should be a number usually Red on the left and Blue on the right.
OR
alternately email us (info@hearingaidparts.co.uk) having taken the measurement from the top of your ear (where spectacles would sit) straight down to the centre of the ear canal entrance in mm – please see picture below.
Replace your receiver wires ONCE A YEAR for optimal performance
